Search more

How important is brake fluid and when should it be replaced?

What are the qualities of a good “brake fluid”? 1. It is a medium for transmitting power from the brake pedal to the brake system well.2. Has a suitable viscosity. all temperature range Both hot and cold.3. Not harmful to the rubber ball. And metal parts in the brake system.4. A good lubricant.to prevent wear of the friction parts Inside the brake system5. Has a high boiling point and is difficult to evaporate. Factors that cause brake fluid to deteriorate The heat is the result of sudden braking. or brake often Under high speed, it will result in the “brake fluid” absorbing the heat.If it can"t be drained to other parts in time Brake fluid then evaporates in the brake cylinders.Resulting in symptoms of missing brakes - deep brakes - no brakes Also known as “breaking brakes”,so the boiling point of “brake fluid” is very important. on the efficiency of the braking system. Humidity When moisture gets into the brake fluid, it results in a lower boiling point. and Thailand is classified as a high humidity area.Therefore, the brake fluid should be changed. Every 1 year to remove moisture mixed in brake fluid and also to prevent corrosion from rust caused by moisture accumulation in the brake cylinderswhich is the root cause of the brake shoes and eventually leaking

Why grind brake discs?

Why grind brake discs?Braking, slowing or stopping the car can occur from the friction of brake pads and brake discs. After being used for a while The contact surface of the brake disc may be damaged. grooved or worn It will be less or more depending on the usage.​Brake disc grinding is to adjust the surface of the brake disc. Smooth rough grooves or disappear by using the blade of a grinder to scrape the surface of the brake disc to increase the friction value between thebrake disc and brake pads, reducing noise, which will result in the brake system working at full capacity. efficiency If the brake discs are rusted It can be solved by grinding brake discs. But if it is very rusty should change the plate instead There are two types of grinding methods for brake discs. 1. Grinding discs close to the wheel or grinding without removing the brake disc It is a grinding disc by using a grinding machine. come in and place next to the brake discwithout having to remove the brake disc, so it"s convenient and fast. You can adjust the balance of the brake disc at the car. 2. Grinding plates or grinding discs,remove the plates to grind at the grinding plates. It is more step and time consuming than close-wheel grinding. Because the dish out of the grinding machine grinding plate instead. butcan adjust the angle, degree of grinding blades more than close grinding .

5 Dangerous braking symptoms while driving that should not be overlooked

5 Dangerous braking symptoms while driving that should not be overlooked : 1. The car tilts to one side while braking.If you find that the car is tilting to one side while tapping the brakes. It may be caused by oil or system lubricant stains. The suspension splashed on the brake discs. until the surface of the brake disc is slippery and the friction is reduced Or caused by wear of the brake caliper set. 2. Brake and steering wheel vibratesIf driving at a speed of 60 km / h or more, then tap the brake and find that the steering wheel vibrates. It is possible that the brake discs may be crooked on either side. Brake discs should be​ cut and symptoms should disappear after grinding. but if the brakes are still vibrating May have to check the front suspension and brake system as a whole. 3. Brakes stubborn.Symptoms of stubborn brakes are when you step on the brakes and brake rarely. brake hard Have to exert a lot of pedaling. It can be caused by a number of reasons, such as a leaking brake booster.

3 dangerous behaviors that damage shock absorbers

1. Do not slow down while driving through rough roads and deep potholes.Severe bumps while driving on rough roads or deep potholes This may cause the car shock absorber to break and cause shock oil to leak.As a result, the efficiency of the shock absorber in controlling the collapse and rebound of the spring can be reduced. Therefore, avoid driving on rough roads or deep potholes.If unavoidable, drive carefully. and slow down while driving through deep holes. 2. Carrying too much weightDriving through uneven roads or carrying heavy loads causing the collapse and rebound of the spring Which shock absorbers come in to dampen the impact of this rebound to make the ride smoother whenthe vehicle has to carry more weight than is suitable for the shock absorber installed especially overloading for a long time The shock absorbers have to work harder than they should be.therefore damaged and deteriorated faster than usual

Strange noise while driving Indicates the health of the shock absorbers.

1. The sound of taps while slowing down.When we brake All the weight of the car is poured into the front of the car. The cause of the noise is mostly from the front shock absorber. In this case, the first thing to do is to check for oil leaks.If the shock absorber leaks, it will cause the piston to stiffen and make noise. Another cause of rattling noise while braking is that the brake pads may have a problem. 2. Loud noise at the wheel when going up a hill or falling into a hole​It can happen for a number of reasons. But the most common are the joints, which can make noise when going uphill or falling. Another cause may be shock absorbers.There is a malfunction that cannot be impacted. It is recommended to bring the car to the service center for the staff to check. 3. Loud noise when turning the carIs a signal indicating that the car"s suspension has a problem. Most of them are caused by the deterioration of different parts starting to loose, such as steering racks, bushings, and shock absorbers.Remember to bring the car in for a check. Because if left it may affect other parts.

Things you should know about wiper blades

Apa yang menyebabkan karet Wiper rusak?Wiper telah memburuk karena alasan ini dan tidak dapat melihat jarak pandang jarak jauh 1. Permukaan tip aus karena pengoperasian normal 2. Karena tidak mungkin untuk menghindari apa pun. Pasir kotor dan halus di antara Wiper dan kaca dapat menyebabkan kerusakan pada Wiper 3. Ketika Wiper telah digunakan dalam waktu yang lama, karetnya akan memgeras Fleksibilitas menjadi berkurang dan cacat pada flop terjadi akibat kontak antara rubber blade dengan cermin, belum termasuk potensi wiper blade penyebab getaran dance, atau gejala wiper lainnyasaat sedang digunakan. Berapa lama wiper bisa digunakan ?Sulit untuk menentukan waktu penggantian Wiper.Mengganti Wiper bisa dilakukan karena harganya yang murah.Oleh karena itu, Wiper harus diganti setahun sekali sesuai jangka waktu pengecekan sesuai dengan anjuran Agar Wiper bisa awet atau tahan lama, wiper blade/ bilah penghapus harus dicuci menggunakan air untuk mencuci puing-puing. dan kotoran yang tertinggal di permukaan kaca bahkan setelah hujan mulai turun. Apa yang terjadi jika noda oli menempel di kaca dan apa yang harus saya gunakan untuk membersihkannya? Ketika noda oli menempel pada kaca, tetesan air dan noda air pada kaca tidak rata dan pantulan cahaya tidak merata yang menyebabkan pembiasan,juga dapat menyebabkan Wiper bersenyawa pembersih kaca depan digunakan untuk mengendurkan oli mudah terkena noda, dan pembersih akan menyerap sisa minyak, jadi bila membersihkan kaca digunakanbersamaan dengan penyeka bekerja, noda minyak akan terhapus.Namun bila residu oli menempel pada kaca, maka perlu menggunakan pembersih kaca untuk membersihkannya. Karet wiper tugasIni memainkan peran penting dalam jarak pandang dalam berbagai kondisi cuaca seperti hujan, dll. Wiper terdiri dari motor (motor), penghubung (tautan), lengan (lengan) dan penghapus (bilah).Penghapus berhubungan langsung dengan kaca depan Depan ke wiper dan debu

wiper system

1. Motor WiperMotor wiper dibagi menurut metode pembangkitan medan magnet (Field Generation) menjadi 2 jenis - koil (Jenis Rotor Luka). Dibungkus di sekitar inti besi untuk menciptakan medanmagnet - magnet permanen (Jenis Magnet Ferit) menggunakan magnet ferit permanen untuk menciptakanmedan magnet. Saat ini, motor magnet permanen telah dikembangkan . Motor DC ringan dan banyak digunakan pada magnet permanen 2. Wiper LinkBatang penghubung wiper memiliki peranan untuk mengubah gerakan rotasi motor wiper menjadi gerakan osilasispindel. Lengan wiper dapat dibagi menjadi 2 jenis- kawat(Jenis Kawat)- batang penghubung (WIper Link) yang umum digunakan adalah tipe batang penghubung (Link Type) 3. Komponen lengan wiperLengan Wiper (Wiper Arm) Lengan Wiper terdiri dari komponen-komponen Sebagai berikut:- Kepala lengan pada wiper(Arm Head) untuk mengencangkan ke poros(Wiper Shaft).- Pegas(Spring) untuk membuat bilah wiper sehingga Ada tekanan dekat pada kaca.- Arm Piece untuk memasang Bilah Wiper- Tengah (Retainer) untuk menutupi semua komponen

Installing wiper blade to wiper arm

How to replacing a wiper arm

3 important points to check the condition of the car When you have to park your car for a long time

Before putting it back into use, it is very important. There are 3 most important points to check as follows: 1. An important part that is indispensable in checking the car is the battery ,especially the car that has been parked for a long time. The battery may deteriorate and cause the car to not start. Because the battery also provides electricity to feed the various systems.To prevent battery deterioration, just start the engine at least once a week and leave it for about 10 minutes to avoid the battery running out of charge. 2. Even if the car is not being used Engine oil can deteriorate over time when checking the car.Therefore, should not overlook checking the condition of the engine oil before bringing the car back to use.In general, the engine oil should be changed every 6 months or according to the change interval of the oil grade used. 3. Leave the car parked for more than 1 month or more will cause the weight of the entire car.fall onto each tire in one spot. May cause deformation of the rubber frame. This can prevent this problem by inflating the tires more than usual. andcheck the condition of the tires before being put back into use